SmallRig 3824 NP-FZ100 Camera Battery and Charger Kit
Product Highlights
- Battery supports original camera and charger without causing pop-ups and enables power display
- Quickly charges one or two batteries with high current output
- LCD screen displays charging current,charging voltage, charging progress and charging capacity in real time
- 2040 mAh high capacity brings long battery life
- Built-in USB-A charging cable and USB-C input interface allow being charged via charger, car charger, power bank
This product is currently out of stock. If you wish to be informed when it is back in stock, please click on the link below.
SmallRig NP-FZ100 Camera Battery and Charger Kit 3824B includes two batteries and one charger. The battery, equipped with a full decoding chip, supports varied cameras perfectly without causing pop-up windows and has quality fireproof ABS and PC shell frosted to ensure fine touch and durability. It is the same size as the original battery, thus fitting seamlessly into battery compartment. The dual battery charger can charge two batteries at the same time, with its LCD screen displaying real-time charging voltage, current and charged capacity.It comes with built-in USB-A charging cable and USB-C input interface, allowing it to be charged via USB adapter, car charger, power bank.
Note:
1. For the best charging experience, power adapter with higher than 5V⎓2.1A output is recommended. Do not use the two input interfaces at the same time.
2. Manually measured weight and size may not be accurate.
3. The kit does not include USB power adapter.
4. The charger comes with a meter to help display how much you charged (mAh). If the battery is temporarily disconnected, the meter will recalculate its charge capacity(mAh).
What's in the box?
- 2 x NP-FZ100 Camera Battery
- 2 x Battery Protective Cover
- 1 x Dual Battery Charger (Built-in USB-A Cable)
- 1 x User Manual
- Compatibility
Sony α6600 / α9 II / α7 III / α7R III / α1 / α7C / α7S III / α7R IV / α7R V / α6700 / FX3 / FX30 / α7CR / α7C II / α7 IV / ZV-E1 / ZV-E10 II
*There are too many compatible models to be listed. Please refer to their battery type.
- Technical Data
Battery Type
Lithium-ion Battery
Battery Parameter
2040mAh 7.2V 14.69Wh
Battery Charging Limited Voltage
8.4V
Charger Input
USB-C: 5V⎓2.1A (Min), USB-A: 5V⎓2.1A (Min)
Charger Output
8.4V⎓1000mA (Single);8.4V⎓1000mA (Dual)
Operating Environment Temperature
0°C~40°C
- Dimensions
Product Dimensions
Single Battery Dimensions 51.8×38.8×22.6 mm; Charger Dimensions 90×56×27mm
Package Dimensions
163×115×36mm
- Weight
Net Weight: Single Battery
78g
Charger
65g
Package Weight
283g
- Materials
ABS+PC